The FETtec FC G4 v1.7 features the latest STM32G4 processor. Providing unparalleled processing power to your aircraft. Along with an IIM-42652 SPI gyro, two 5v BECs, 6-27V (2-6S) power handling, and a host of other features, the G4 from FETtec is on the cutting edge of Flight Controller technology.

Specifications

• Latest STM32G4 Processor
  • 170Mhz + Math accelerator

  • IIM-42652 SPI

• Supply voltage 6-27V (2S-6S Lipo)

• 2x dedicated onboard BEC (max. 600mA each)
  • 5V BEC for RX

  • 5V/16V BEC for VTX (switchable and real Pit*)

• 2x 8 pin connector for solder free ESC connection
  • Connector 1: ESC signal 1-4, telemetry, VCC, GND

  • Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND

• 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
  • real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

• 2x 6 pin connectors for serials
  • RX1, TX1, 3.3V, VCC, 5V, GND

  • RX3, VCS/TX3, RGB LED, VCC, 5V, GND

• 1x 4 pin connector for receiver
  • Signal, TLM, 5V, GND

• 5 UART serials
  • UART 1 free

  • UART 2 used for Receiver

  • UART 3 free

  • UART 4 used for onboard OSD, can be set free

  • UART 5 used for ESCs / TLM / Onewire

• 4 ESC solder pads (Signal/GND) in each corner

• Buzzer pads

• 4 tiny RGB LEDs (selectable color)

• Supported ESC protocols
  • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

• FETtec KISS firmware

• Onboard OSD
  • Graphic OSD (STM32)

  • Full KISS Tuning

  • Filter (PIDs, Rates, Settings)

  • LED control (RGB LED, Racewire)

  • VTX

  • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)

  • KISS GPS support + live map

  • Custom graphic pilot logo

  • Stick overlay

  • Custom layout

  • can be deactivated for usage of digital systems

• Connector type: JST-SH-1mm

Dimensions

• Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm

• Mounting hole arrangement:
  • 20 x 20mm with M2 mounting hole (expandable to M3)

  • 30 x 30mm with M3 mounting hole

  • 30 x 30mm mounting hole tips are removable to reduce overall FC size

• Overall height: 7,9mm

• Weight: 5,37g

Firmware

• KISS Firmware

• FETtec OSD Firmware

Downloads

•  Download FETtec FC G4 manual

Includes

• 1x FETtec FC G4-N

• 1x 8 pin cable (open on one side)

• 1x 6 pin cable (open on one side)