Cart

FETtec FC G4 v1.7

€70.79
€60.17 Save 15%

The FETtec FC G4 v1.7 features the latest STM32G4 processor. Providing unparalleled processing power to your aircraft. Along with an IIM-42652 SPI gyro, two 5v BECs, 6-27V (2-6S) power handling, and a host of other features, the G4 from FETtec is on the cutting edge of Flight Controller technology.

Quantity

Guarantee safe & secure checkout

The FETtec FC G4 v1.7 features the latest STM32G4 processor. Providing unparalleled processing power to your aircraft. Along with an IIM-42652 SPI gyro, two 5v BECs, 6-27V (2-6S) power handling, and a host of other features, the G4 from FETtec is on the cutting edge of Flight Controller technology.

Specifications

  • Latest STM32G4 Processor

    • 170Mhz + Math accelerator

    • IIM-42652 SPI

  • Supply voltage 6-27V (2S-6S Lipo)

  • 2x dedicated onboard BEC (max. 600mA each)

    • 5V BEC for RX

    • 5V/16V BEC for VTX (switchable and real Pit*)

  • 2x 8 pin connector for solder free ESC connection

    • Connector 1: ESC signal 1-4, telemetry, VCC, GND

    • Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND

  • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems

    • real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

  • 2x 6 pin connectors for serials

    • RX1, TX1, 3.3V, VCC, 5V, GND

    • RX3, VCS/TX3, RGB LED, VCC, 5V, GND

  • 1x 4 pin connector for receiver

    • Signal, TLM, 5V, GND

  • 5 UART serials

    • UART 1 free

    • UART 2 used for Receiver

    • UART 3 free

    • UART 4 used for onboard OSD, can be set free

    • UART 5 used for ESCs / TLM / Onewire

  • 4 ESC solder pads (Signal/GND) in each corner

  • Buzzer pads

  • 4 tiny RGB LEDs (selectable color)

  • Supported ESC protocols

    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

  • FETtec KISS firmware

  • Onboard OSD

    • Graphic OSD (STM32)

    • Full KISS Tuning

    • Filter (PIDs, Rates, Settings)

    • LED control (RGB LED, Racewire)

    • VTX

    • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)

    • KISS GPS support + live map

    • Custom graphic pilot logo

    • Stick overlay

    • Custom layout

    • can be deactivated for usage of digital systems

  • Connector type: JST-SH-1mm

Dimensions

  • Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm

  • Mounting hole arrangement:

    • 20 x 20mm with M2 mounting hole (expandable to M3)

    • 30 x 30mm with M3 mounting hole

    • 30 x 30mm mounting hole tips are removable to reduce overall FC size

  • Overall height: 7,9mm

  • Weight: 5,37g

Firmware

  • KISS Firmware

  • FETtec OSD Firmware

Downloads

Includes

  • 1x FETtec FC G4-N

  • 1x 8 pin cable (open on one side)

  • 1x 6 pin cable (open on one side)

 

2 other products in the same category:

We use cookies to provide you with the most fulfilling experience possible on our website. For more details, please read our Cookies Policy.